Choosing barcode scanners for a small warehouse

For a small warehouse, choose between a dedicated handheld computer with a built-in scanner and a phone paired with a Bluetooth scanner. Whichever you pick, check the scan engine, battery life, screen readability, toughness, and that scans arrive in your software as keyboard input.

Handheld computer or phone

A handheld warehouse computer is a rugged Android device with a scanner built into the top. It scans quickly, survives drops, and is made to be held all day. It costs more than a phone and is less pleasant for anything other than warehouse work.

A phone is cheap and familiar, but its camera is slow for scanning all day and it does not like being dropped on concrete. Paired with a small Bluetooth scanner, a phone becomes a workable setup, especially for occasional tasks such as receiving or counting.

Many warehouses mix the two: handhelds for people who pick and pack all day, phones for occasional use.

The scan engine

The scan engine decides how fast and how reliably codes are read. Look for one that reads both ordinary barcodes (EAN) and QR codes, since bin labels are often QR. Test it on your worst labels: shiny packaging, small codes, labels on a curved bottle, codes slightly damaged. Try it at the distance your pickers will use, for example a bin label on a high shelf.

Battery, screen and toughness

  • Battery: it must last a full shift. A swappable battery or a spare device on charge avoids a dead scanner in the afternoon.
  • Screen: readable in bright light and near a loading door, and large enough for the bin code to be read at a glance.
  • Toughness: ask for the drop height and the dust and water rating, and choose for your floor. Concrete is unforgiving.
  • Grip and weight: hold it for ten minutes before you buy ten of them. A pistol grip helps people who scan all day.
  • Gloves: if your warehouse is cold, check the buttons and screen work with gloves on.

Keyboard-wedge scanning

Most scanners can work in keyboard mode, often called keyboard wedge: the scanner types the code into whatever field is active, as if someone had typed it quickly and pressed Enter. Software that accepts keyboard input works with almost any scanner, and nothing extra needs to be installed on the device.

When testing, check that the scanner sends Enter after the code, and that it uses the same keyboard layout as the device, or digits and letters can come out wrong.

Before you buy

Borrow or buy one unit first and use it for a real day: a picking run, a delivery, a count. Ask the people who will hold it what they think. Then buy the rest, plus one spare.

Think about the rest of the setup as well. Each device needs a charging place, Wi-Fi that reaches the far end of every aisle, and someone who looks after updates. Walk the warehouse with a phone and check the signal in the corners and between full racks; a scanner that loses its connection halfway down an aisle is worse than none.

Finally, consider label printers alongside scanners. Products without a barcode and bins without a label are what slow scanning down, so a small label printer for products and shelves is often worth more than a faster scanner.

Related guides

Glossary
Reduce picking errors How to name bin locations Moving from Excel to a WMS

See it with your own orders.

In the demo we connect your channels and walk you through these steps on the real screens, with your own products.

Book a demo Try it free